The CSW-200-UL-1HP is designed for large gates on condos and commercial buildings. It delivers 250lbs. of pulling torque, and is capable of 60 cycles per hour on gates up to 1000lbs. and 20 feet in length. The unit is equipped with two 1/2 horse power motors which operate a heavy duty, double transmission with a 900:1 ratio.
These operators are skillfully crafted in the USA. Every unit is carefully inspected both electronically and mechanically to provide the quality expected. Elite uses computer aided design to assure the most precise fit for their operator components. High quality and years of proven reliability places Elite CSW Series swing gate operators ahead of the competition.
Elite provides seven year single home warranty use or five year commercial use warranty.
Features
Limit Switch Design - The CSW-200-UL-1HP is manufactured with a precision limit switch system. This system uses high speed ball bearings and high quality components for efficiency and reliability.
Reversing Sensor - The digital current sensor continuously monitors the motor current. It can be set for both the opening and closing cycles. If the gate is closing and hits a vehicle, the sensor detects the increased load on the motor and reverses. If the gate is opening and hits a vehicle, it stops and reverses 4-6 inches. The sensor is smart enough to operate on off-level installations and to react to wind resistance.
Master/Slave System - This unique system allows precise, synchronized movement and communication between the two gate operators using 3 wire RS-485 bi-directional technology. With the Omnicontrol board, master/slave conversion is now easier than ever.
Omnicontrol Board - All UL model commercial swing gate operators now use the Omnicontrol board for enhanced, reliable operation conforming to the newest UL-325 and UL-991 specifications. The advanced electronic control board now offers integrated functions to make all input and outputs of the gate operator easy to access. It offers solid state motor control, spike suppressors, safety alarm, and many other unique features. The new Omnicontrol board assures the latest requirements and most advanced technology in the industry, keeping all Elite commercial operators in a class by themselves.Omnicontrol Board - All UL model Elite commercial swing gate operators now use the Omnicontrol board for enhanced, reliable operation conforming to the newest UL-325 and UL-991 specifications. THe advanced electronic control board now offers integrated functions to make all input and outputs of the gate operator easy to access. It offers solid state motor control, spike suppressors, safety alarm, and many other unique features. The new Omnicontrol board assures the latest requirements and most advanced technology in the industry, keeping all Elite commercial operators in a class by themselves.
Electrical Specifications
Modular Board - Uses LEDs to indicate all input and output functions of the gate operator.
Intelligent Master/Slave - Precise, synchronized movement and communication between two gate operators using 3 wire RS-485 bi-directional technology.
ERD - If the gate hits a vehicle while closing, it re-opens. If it hits a vehicle while opening, it stops, reverses 4 to 6 inches and stops again.
Surge Suppressor - 20,000 amps and near lightning protection with modular omni surge suppressor. Initial response time: 1pS.
Digital Motor Protection - Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverses direction for several inches, and stops.
Alternate Outputs - With Omni Option board 3 push button command control, burglar alarm input and output.
Electronic Inputs - Radio receiver, key switch, safety loop, center loop, telephone entry system, computer input, fire dept, key switch, and 3-push-button station.
Gate Traveling Time - Adjusted by a precision mechanical device and electrical limit switch system.
Timer - Adjustable timer can be set from 0 to 60 seconds.
Soft Stop - Gate travels through the cycle at normal speed and comes to a stop slowly for more accurate gate cycle. Equipped with integrated time delay for long mechanical life expectancy.
Power Input On/Off Switch - Controls power input to the board with convenient switch.
Integrated Loop Detectors - Easy to install, modular, plug in loop detector inputs for exit loop, center loop, and safety loop.
Power Management - Board includes electronic power management with over current shutdown and automatic recovery.
120VAC Power - Built-in 120VAC power receptacle (NEMA 5-15)
Magnetic Lock - With Omni Option board, magnetic lock system is incorporated, allowing you to easily add the "MG1300" electromagnetic locking system to the gate.
Motor Drive - Solid-state electronic motor drive system is incorporated into board.
Burglar Alarm - With Omni Option board, interfaces with existing home alarm or alarm output.
Alarm - If the gate hits an object twice while opening or closing, the system will shut down and alarm will sound for five minutes, After five minutes the system will automatically reset itself. To reset the system during the five minutes, a manual reset button must be used
3 Push Button Control - On board gate operator control for close, stop, and open.
Mechanical Specifications
Chassis - Constructed with 1/4" sanded, welded, and gold zinc plated sheet metal.
Swing Arm - Non-scissor type arm action.
Worm Gear Reduction - Two, 30:1 worm gears equal to 900:1 reduction. Both are lubricated in an oil bath.
Output Shaft - 2.5" cold rolled steel.
Motor - Equipped with two 1/2 horsepower, parking gate motors that work together equaling one horsepower.
Capabilities - Maximum gate length 20'. Maximum gate weight 1000lbs.
Cover - High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance.
Gate Traveling Speed - 90 degree opening in 13-15 seconds.
Finishing - All metal parts are gold zinc plated for rust proof protection.
Shipping Weight - 199 pounds.
Emergency Release - The gate is easily disconnected by turning the release handle.
Approval - ETL Listed UL325 and UL991.
Cycles - Capable of 60 cycles per hour.
Dimensions - L 24.5" x W 15" x H 28"
