The MDKP wireless keypad can transmit a unique signal for each 1-6 digit PIN code entered. It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions. It generates a separate transmission code for each user selectable 1-6 digit PIN. Codes are learned by the access controller or receiver, either the maximum number dependent upon the model used. For instance, if the controller is the AP-3, the MDKP can generate 338 unique codes.
To operate the MDKP, a user simply enters a PIN followed by the # key, and the code is transmitted to the receiver for validation. Downlighting can be turned on by pressing the # key twice; it remains on for 30 seconds or until a code is sent. Installation and set-up are simple. The MDKP can be mounted on either a wall or a gooseneck. It is ready to use upon plugging in its 9 V lithium battery and programming of user codes.
Features
- Factory programmed MegaCode format; internal antenna
- 1-6 digit PIN for each user
- Long life lithium battery
- Rugged cast aluminum housing
- Built-in downlight
Specifications
- Dimensions: 4" Wide by 7" Height by 3" Deep
- Power: 9V Lithium Battery (Supplied)
- Battery Life: 5 Years with 25 Activations per Day
- Operating Temperature: -22F to 149F
- Standard Equipment: MDKP Keypad with Vandal-Resistant Antenna; 9V Lithium Battery
