Westco has detected that your browser is not current.
The Westco website was designed to work best with Firefox 2.x, Internet Explorer 7.x, and Netscape Navigator 9.x. Continuing to use your current browser may cause some pages to render improperly. Westco recommends that you upgrade to the latest version of one of the above mentioned web browsers.

Close -->
Multi-space parking meter, proximity reader, parking garage collage
Toll Free Phone:   1.800.978.4621
Toll Free FAX:      1.800.978.4621
Model MIB-40-C900 : 20' Direct Drive Barrier Gate Operator
Item Model: MIB-40-C900
Item SKU: WPT-MIB-40-C900
Typical Lead Time: 2 weeks
Warranty: 1 year
Features for this product:
-Direct Drive
-Up to 20' Gate Arm
-Microprocessor Controller
-Extremely Reliable
-Heavy Duty Housing
-Tip Support
-Optional Battery Backup
Retail Price: Call 800-978-4621
Your Price: Call 800-978-4621

See options tab below

To get a quote from Westco, please click the "Get Quote" button below or call 1-800-978-4621.
Get Quote Button
General Info Specifications Cut Sheets Options Accessories Parts Consumables
General Information
Description

NEW Battery Backup Option: The new highly efficient battery backup option can operate the barrier gate for up to 50 minutes at 75% duty cycle. Low-current card readers, proximity readers, and timers can also be connected to the battery backup. The battery backup option can be ordered with the gate operator or it can be installed in the field after the gate opener has been installed.

The WPT-MIB-40-C900 electronic barrier gate operator is an intelligent barrier with a broad range of built-in features that allows the gate operator to fit many applications within the parking industry. The WPT-MIB-40-C900 support boom lengths up to 20'. Opening and closing times are approximately 4 seconds.


What is a Direct Drive Barrier Gate Operator?

A direct drive barrier gate operator uses a design that allows the electric motor to be directly connected to the barrier boom (gate arm) assembly. This allows the barrier gate operator to eliminate components such as belts, pulleys, frictional clutches, and limit switches which all require maintenance over time. Therefore, direct drive barrier gate operators are maintenance-free and more reliable over time.


The Drive Train

This gate operator employs an electric torque motor with a unique lever drive system that rids the barrier of any belts or pulleys. This unique drive system also provides fast open and close times of 4 seconds while also providing an anti-bounce boom at the end positions. The barrier gate arm weight is counter-balanced via a precisely adjusted spring system. The barrier arm can easily be switched from right-handed to left-handed.

The intelligent gate operator is driven by a electric AC torque motor that sits in a central cast aluminum module. The module contains the drive shaft with bearings, gear box, and a connection bracket to connect the springs to the module. The MIB-40-C900 design does not use any limit switches or frictional clutches which provides for a maintenance-free operation. At each of the end positions, the drive lever system provides a mechanically locked barrier boom. The built-in position sensor of the barrier gate arm provides the controller with precise gate arm positioning data that allows for optimal braking and anti-bounce boom operation at the end positions.


The Housing

The housing is constructed from 14 gauge zinc plated steel sheets in addition to a base frame constructed from stainless steel. The housing is also powder and phosphate coated to ensure protection from corrosion. The MIB-40-C900 has a maintenance front door as well as a removable top cover that allows for easy access to all components of the barrier gate operator. The controller is mounted onto a removable zinc plated steel panel. The standard housing is painted in a RAL 2000 orange. Other RAL colors are offered as an option for an extra cost.


Gate Arms

The WPT-MIB-40-C900 gate arm is made from 1/16" extruded aluminum alloy to produce a octagonal cross section with the dimensions of 4" by 2 1/8". The gate arm is then finished with a RAL 9010 powder coat and reflective red safety tape. Gate arms longer than 14' require either a pendulum support or fixed support post. See the options tab for more information on Pendulum Supports and Fixed Post Supports. For height restricted applications such as parking garages, an articulated arm can be used. Please provide Westco the length of the articulated arm and the height restrictions when ordering.

Here are straight gate arms that are compatible with the WPT-MIB-40-C900:

8' Octagonal Aluminum Gate Opener Arm
10' Octagonal Aluminum Gate Opener Arm
12' Octagonal Aluminum Gate Opener Arm

Here are articulated (folding) gate arms that are compatible with the WPT-MIB-40-C900:

8' Octagonal Aluminum Folding Gate Arm
10' Octagonal Aluminum Folding Gate Arm
12' Octagonal Aluminum Folding Gate Arm

The Electronic Controller

The WPT-MIB-40-C900 uses a microprocessor based controller with a 16 digit LCD display. The display will show the user the gate arm position, the state of both loops, the gate operator mode, the state of each input, the state of both detector output relays, and the motor power. The controller includes (2) built-in vehicle detectors that are fully programmable for opening/closing loops. Directional logic is built into the controller for bi-directional applications. The controller also supports (5) input terminals and (2) output terminals. This gate operator controller is also highly programmable for many different parking layout configurations. Free exits, bi-directional layouts, connections to ticket dispensers and card readers are all easily configured. Programming the gate operator is easily done with a rotary knob and push buttons.


Installation

The installation of a barrier gate operator requires a concrete foundation and electrical connections for both power and communications.

A lane diagram or layout should first be designed to represent the customer's goals for the application area. If vehicle loops are to be used, proper layout of the loop needs to be considered in the lane diagram. See Westco's HelpCenter for more information on constructing vehicle loops and layout diagrams. Westco can also assist customers with the design of barrier gate operator systems.

Electrical connections for barrier gate operators must also be considered as part of the lane diagram. Typically 120VAC power and communication connections for vehicle loops, card readers, proximity readers, and push buttons are required.


Opening and Closing Devices

All gate operators require an opening device and closing device to operate properly. If no opening devices are used, the gate operator will not open or close. Therefore, thought must be taken to what device will open the gate operator and what device will close the gate operator.

Card Readers, Proximity Readers, Keypads, Vehicle Loops, and Radio Receivers are among a few of the opening devices used for opening a barrier gate operator.

Vehicle Loops, Radio Receivers, and Push Buttons are a few of the closing devices used for the closing of a barrier gate operator. For an automatic closing of a gate operator, a vehicle loop should be used.


Why Purchase from Westco?

Westco Parking Technologies has been in business for over 25 years and offers over 30 years of professional parking industry expertise. This experience translates to our customers receiving top flight support and service in building and designing parking systems. Westco Parking Technologies has installed hundreds of electronic barrier gate operators including card readers, proximity readers, keypads, and push buttons. Westco has also installed hundreds of in-ground vehicle loops in both concrete and asphault applications. Be sure the next company you purchase an electric gate operator from has the experience and knowledge to properly support and design your access or revenue control system. You can count on Westco Parking Technologies to give you the support you need.


What are the Differences Between the MIB-30-C100 and the MIB-40-C900?

The main differences between the WPT-MIB-30-C100 and WPT-MIB-40-C900 barrier gate operators are gate arm length support and opening and closing times. The WPT-MIB-30-C100 will support up to 12' gate arm lengths while providing 1.4-1.9 second opening and closing times. The MIB-40-C900 supports gate arm lengths up to 20' (pendulum supports or fixed post supports are required for longer than 12' arm lengths) while providing 4 second opening and closing times. Therefore, the MIB-40-C900 takes about twice as long to open and close compared to the MIB-30-C100


Industry Jargon

Barrier Gate Operators can be referred to as Gate Openers, Traffic Gates, Barrier Gates, Barrier Arms, Electric Gates, and Automatic Gates to name a few.

Specifications
Maximum Boom Length: 
20 feet 
Gate Boom (Arm) Included? 
No 
Rise / Fall Time of Gate Arm: 
4 / 4 seconds 
Power Backup Integrated? 
Yes, Option 
Integrated Vehicle Detectors? 
Yes, Dual 
Requires Pendulum Support? 
Yes, over 14 feet 
Direct Drive? 
Yes 
Materials: 
14 Gauge Steel 
Colors Available: 
RAL 9010 White, RAL 2000 Orange, RAL 1028 Yellow 
Power Requirements: 
60Hz.,120VAC @ 120 Watts 
Housing Width: 
13.75 inches 
Housing Height: 
42 inches 
Housing Length: 
13.75 inches 
Weight: 
110 lbs. 
Typical Lead Time: 
2 weeks 
Warranty: 
1 year 
Options
Available options for this product are:

Invisa Smart Gate Sensor Option
The SmartGate Non-Contact Safety Sensor (is the newest sensor from Invisa developed for use with Parking Barrier Gates. It is the only safety device currently sold for these applications that does not rely on a fixed beam, emitter/detector, contact edge or inductive loop. Sensing for the unit moves with, and in front of, the edge of the moving parking arm or slide gate, detecting conductive objects (both small and large) that may be present in the potentially hazardous path of travel. The sensor continuously compensates for environmental changes. The system has a failsafe system that detects when the antenna connection is either broken or shorted.

Battery Backup Option
The new highly efficient battery backup option can operate the barrier gate for up to 50 minutes at 75% duty cycle. Low-current card readers can also be connected to the battery backup.

Accessories
8' Octagonal Aluminum Gate Opener Arm
8' Octagonal Aluminum Gate Opener Arm
10' Octagonal Aluminum Gate Arm
10' Octagonal Aluminum Gate Arm
12' Octagonal Aluminum Gate Arm
12' Octagonal Aluminum Gate Arm
15' Octagonal Aluminum Gate Arm
15' Octagonal Aluminum Gate Arm
20' Octagonal Aluminum Gate Arm
20' Octagonal Aluminum Gate Arm
24 Hour, 7 Day Timer
24 Hour, 7 Day Timer
12-24V Gate Radio Receiver
12-24V Gate Radio Receiver
115VAC Gate Radio Receiver
115VAC Gate Radio Receiver
Pre-Fabbed Vehicle Loop
Pre-Fabbed Vehicle Loop
Large All-in-One Wax
Large All-in-One Wax
10' Aluminum Folding Gate Arm
10' Aluminum Folding Gate Arm
8' Aluminum Folding Gate Arm
8' Aluminum Folding Gate Arm
12' Aluminum Folding Gate Arm
12' Aluminum Folding Gate Arm
Parts
There are no parts for this product.
Consumables
There are no consumables for this product.
Model MIB-40-C900, 20' Direct Drive Barrier Gate Operator Information Request Form
Have a salesperson contact me
Send me a price quote
Anti-Spam Filter Question:
     What is 2+2?  A value is required.Invalid format.
First Name
A value is required.
Last Name
A value is required.
Company
Email
A value is required.
Phone
Invalid format.
Comments
How did you hear about us?
Please select an item.